Kyocera KM-2560 Fax System (M) Operation Guide Rev-2.0 - Page 74

FAX Operation (Application) Interrupt Send During communication, when you scan originals by selecting direct transmission, you can use interrupt send. Even when the communication is prolonged due to broadcast transmission or a next transmission being scheduled, the machine will first send originals for which interrupt send has been set. NOTE: When the number of standby transmissions and delayed transmissions has already reached 200, you cannot use interrupt send. Depending on the timing of the interruption, you may not be able to interrupt transmission immediately. 1 Press the Send key. 2 Load the originals to be sent using Interrupt Send. 3 Press [Advanced Setup], and then [FAX Direct Transmission]. 4 Press [On]. Ready to directly transmit FAX. Enter Destination. FAX Direct Transmission Destinatio n 0 Press [OK] to display the image. Send FAX directly, without reading o riginal into memory. FAX can also be sent page by page, with confirmation after each page. Off On Status 5 Press [OK]. Add Sho rtcut Cancel OK 6/6/2006 10:00 6 Set the destination, and press the Start key. The originals are left in queue, and the transmission will start when transmission becomes possible. NOTE: For operation of direct transmission, refer to Selection of Transmission Method on page 3-2. To cancel transmission while waiting for interrupt send, press the Stop key on the operation panel or [Cancel] on the touch panel. For details, refer to Cancelling Communication on page 3-13. 7 When the interrupt send is completed, the canceled communication and standby transmission will automatically resume. 4-8 OPERATION GUIDE