Kyocera KM-2560 Fax System (M) Operation Guide Rev-2.0 - Page 38

FAX Operation (Basic) Key Transmission Start Speed ECM Encrypted Transmission Description To change the transmission start speed, press this key. Select the speed from 33,600 bps, 14,400 bps, and 9,600 bps. ECM (error correction mode) is a function to automatically resend an image that has not been correctly sent or received due to the effects of noise on the telephone line during transmission. To change the ECM communication setting, press this key. To send faxes using encryption, press this key. For details, refer to Encryption on page 5-59. [On Hook] After pressing this key, you can dial the receiving system using the numeric keys. For details, refer to Manual Send on page 4-11. NOTE: Use [On Hook] before dialing the recipient's fax number. Dialing methods without using the numeric keys • Using the Address Book (Refer to page 3-16.) • Using One-touch keys (Refer to page 3-27.) • Using the Speed Dial key (Refer to page 3-30.) • Manual redial (recall) (Refer to page 3-31.) NOTE: In addition to a fax, you can include e-mail transmission and folder (SMB/FTP) transmission to send as one job. For details, refer to the machine's Operation Guide. When the destination includes fax, the color mode becomes completely monochrome. Selecting the Resolution 5 Select the resolution suitable for sending originals. • 200 × 100 dpi (Normal): when sending originals with standard size characters Typical character size: 10.5 point (example: Resolution Resolution) • 200 × 200 dpi (Fine): when sending originals with relatively small characters and thin lines Typical character size: 8 point (example: Resolution Resolution) 3-6 OPERATION GUIDE