Lexmark X945e User's Guide - Page 199
PPDS font error, 51 Defective flash detected, 52 Flash full, 53 Unformatted flash detected
View all Lexmark X945e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
50 PPDS font error • Touch Continue to clear the message and continue printing. • The printer cannot find a requested font. From the PPDS menu, select Best Fit, and then select On. The printer will find a similar font and reformat the affected text. • Cancel the current print job. 51 Defective flash detected • Touch Continue to clear the message and continue printing. • Cancel the current print job. 52 Flash full • Touch Continue to clear the message and continue printing. Downloaded fonts and macros not previously stored in flash memory are deleted. • Delete fonts, macros, and other data stored in flash memory. • Upgrade to a larger capacity flash memory card. 53 Unformatted flash detected • Touch Continue to stop the defragment operation and continue printing. • Format the flash memory. If the error message remains, the flash memory may be defective and require replacing. 54 Serial option error • Check that the serial cable is connected correctly and is the proper one for the serial port. • Check that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer and host computer. • Touch Continue to continue printing. • Turn the printer power off and then back on to reset the printer. 54 Standard network software error • Touch Continue to continue printing. • Turn the printer power off and then back on to reset the printer. • Upgrade (flash) the network firmware in the printer or print server. 54 Network software error • Touch Continue to continue printing. • Turn the printer power off and then back on to reset the printer. • Upgrade (flash) the network firmware in the printer or print server. 55 Unsupported option in slot 1 Turn the printer power off. 2 Unplug the power cord from the wall outlet. 3 Remove the unsupported optional interface card or internal print server from the printer system board. 4 Connect the power cord to a properly grounded outlet. 5 Turn the printer power back on. 199