Lexmark X945e User's Guide - Page 61

Notes: • The Paper Size must be set to Letter, Legal, A4, or B5 JIS. • The Copy Size must be set to 100%. 1 Load an original document faceup and short edge first into the ADF or facedown on the scanner glass. Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass. 2 If you are loading a document into the ADF, adjust the paper guides. 3 On the home screen, touch Copy. 4 Select a duplex setting. 5 Touch Options. 6 Touch Paper Saver. 7 Select the output you want. For example, if you have four portrait-oriented original documents that you want copied to the same side of one sheet, touch 4 on 1 Portrait. 8 Touch Print Page Borders if you want a box drawn around each page of the copies. 9 Touch Done. 10 Touch Copy It. Creating a custom job (job build) The custom job or job build is used to combine one or more sets of original documents into a single copy job. Each set may be scanned using different job parameters. When a copy job is submitted and Custom Job is enabled, the scanner scans the first set of original documents using the supplied parameters, and then it scans the next set with the same or different parameters. The definition of a set depends on the scan source: • If you scan a document on the scanner glass, a set consists of one page. • If you scan multiple pages using the ADF, a set consists of all scanned pages until the ADF becomes empty. • If you scan one page using the ADF, a set consists of one page. For example: 1 Load an original document in the ADF faceup, short edge first. 2 Adjust the paper guides. 3 On the home screen, touch Copy. 4 Touch Options. 5 Touch Custom Job. 6 Touch On. 7 Touch Done. 8 Touch Copy It. When the end of a set is reached, the scan screen appears. 61