Magellan MobileMapper CX Getting Started Guide - Page 27

English Connection Profile Unknown The GPRS connection profile you want to use is not stored in your cell phone, or your cell phone does not let you list the profiles stored in its memory or SIM card. In this case, you will have to enter the parameters of the connection profile in the Dial-Up Connection window. One or several of the following parameters (APN parameters) may be required, depending on your provider: Parameter User Name Password Domain Definition APN Login APN password APN domain In this case, there is only one possible GPRS call number, which is: *99# Special Cases For some cell phone models, entering a GPRS call number and the required APN parameters is not enough to establish a GPRS connection. In this case, when configuring the connection, a Hayes modem command, instead of the APN parameters, should be entered to perform the connection. The modem command should be entered in a dedicated field, on the Call Options tab of the "Network and Dial-up Connections" utility, (see command example on the left). The command is in the form: +CGDCONT=,,,,, (more information on this command at http://www.phonestar.com.my/s_at_10.html). When used, the modem command replaces all the APN parameters, which means you should leave the User Name, Password and Domain parameters as set by the utility. Finally, when a modem command is used, use the following GPRS call number: *99# 19