Magellan MobileMapper CX Getting Started Guide - Page 61
Local Services, Introduction
UPC - 009905860047
View all Magellan MobileMapper CX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
English - To demand that a remote device be allowed to access the local services only after pairing itself with MobileMapper CX, check the Enabled box underneath Authentication. Otherwise keep this option disabled (check box cleared). Caution! This option is automatically disabled every time you start Bluetooth Manager. - Tap OK on top of the window for the changes to take effect. Local Services Introduction The local services offered by MobileMapper CX's Bluetooth controller are the following: • Serial Port Service. The Serial Port service allows you to exchange data with a remote device via a virtual Bluetooth serial port. This service is used when outputting GPS data via an auxiliary output (see GPS Ports Configuration on page 46). • File Transfer Service. This service allows any two Bluetooth-enabled devices to exchange files. • Object Push Service. This service is required to run the File Transfer Service but is not usable as such in MobileMapper CX. To list the local services offered by MobileMapper CX: • Tap located in the Bluetooth Manager toolbar. The Bluetooth window shows the three icons representing its three local services. Note that all the services are made active at power up (a small green circle containing a plug symbol is visible on each active service; see screen opposite). 53