Magellan MobileMapper CX Getting Started Guide - Page 74
Optimizing Accuracy, General Guidelines - office
UPC - 009905860047
View all Magellan MobileMapper CX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
English Optimizing Accuracy General Guidelines There are five basic rules for recording MobileMapper CX rover data so as to achieve the optimal accuracy: 1. Allow the receiver to have full "view" of the sky the entire time a job is open, not just when logging data to a feature. There are three things you can do to improve signal reception: • While you do not need a survey-grade external antenna for sub-meter accuracy, using one will yield better accuracy in all environments. • If you are not using an external antenna, keep the MobileMapper CX receiver at a 45-degree angle the entire time a job is open (or as long as possible). • If you are not using an external antenna, keep the MobileMapper CX receiver as high as possible the entire time a job is open (or as long as possible). 2. When you record a point feature, remain stationary for 10 seconds both before opening the feature and after closing the feature. 3. Average all point features for at least 30 seconds. 4. Make sure you are using the latest firmware (both the Operating System firmware and GPS firmware) for the MobileMapper CX receiver and the latest version of MobileMapper Office). 5. Adjust the SNR, PDOP and Elevation masks on the receiver to reflect your environment. 66