Maytag MHWZ600TE Use and Care Guide - Page 16

3. PushinthedispensderrawesrlowlyandcompleteIltyoavoidaspill). / B Fabric softener compartment (letter D in Dispenser Illustration) Add V4 cup (60 ml.) liquid fabric softener to this compartment. Fabric softener will be automatically dispensed in the final rinse or in the EXTRA RINSE, if selected. • Do not fill beyond the "MAX" level. 1. [b pause the washer at any time, select PAUSE/CANCEl.. 2. [b continue the cycle, select and hold START (for approximately 1 second). Dispenser B. Main l/Vash detergent compartment C. liquid chlorine bleach compartment D. Fabric softener compartm(!llt Main Wash detergent compartment ([ c'tter B in Dispenser Illustration) Add liquid or powdered HE detergent to this compartment for your main wash cycle. • Powdered color-safe bleach may be added to the Main Wash compartment along with the powdered detergent. • Use the measurement device which comes with the detergent. Add no more than the manufacturer's recommended amount. NOTE: Overfilling could cause an oversudsing condition. Chlorine bleach compartment (Letter C in Dispenser Illustration) Add NO MORE THAN ¾ cup (160 m[) liquid chlorine bleach to this compartment. The bleach will be automatically diluted and dispensed at the best time during the first rinse after the wash cycle. This compartment cannot dilute powdered bleach. • Use only liquid chlorine bleach in this dispenser. Do not use this dispenser to add powdered chlorine or any form of color-safe bleach to your load. • Always measure liquid chlorine bleach. Use a measuring cup with a pour spout; do not guess. Follow the manufacturer's directions for proper use. • Do not fill beyond the "MAX" level. NOTE: Overfilling could cause garment damage. Not all Options and Modifiers are available with all Cycles. Cycles, Options and Modifiers can be changed anytime before START is selected. To stop a cycle and select a new cycle 1. Select PAUSE/CANCEl twice. 2. Select POWER. 3. Select desired cycle. 4. Select the desired OPTIONS such as Prewash, MAXEXTRACT _, Stain Cycle or Extra Rinse. 5. Select the desired MODIFIERS such as Spin Speed or Wash/Rinse Temp. 6. Select and hold START (for approximately of the new cycle. 1 second) to restart the washer at the beginning To cancel a cycle 1. Select PAUSE/CANCEl. twice. 2. ]he washer powers down, the door unlocks, and clothes can be removed. NOTE: If the water level or the temperature is too high, the washer will drain automatically before the door unlocks. To change Options or Modifiers after the cycle has started 1. Select PAUSE/CANCEl. 2. Select the desired Spin Speed, Wash/Rinse [_mp or OPTION (such as Prewash, MAXEXTRACT_L Stain Cycle or Extra Rinse). If the modifier or option are not available, the machine will beep. 3. Select and hold START (for approximately 1 second) to continue the cycle. To drain the washer manually 1. Select PAUSE/CANCEL. 2. SelectSPIN Only. 3. Select and hold START (for approximately 1 second) to begin the drain. 4. When the spin is complete, the door unlocks. Items can be removed from the washer. 16