Netgear DGN2200v3 DGN2200v3 User Manual - Page 109
Factory Settings, Table 3., Factory Default Settings - factory reset
View all Netgear DGN2200v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
N300 Wireless ADSL2+ Modem Router DGN2200v3 Factory Settings You can return the modem router to its factory settings. On the bottom of the modem router, use the end of a paper clip or some other similar object to press and hold the Restore Factory Settings button for at least 7 seconds. The modem router resets, and returns to the factory settings. Your device will return to the factory configuration settings shown in the following table. Table 3. Factory Default Settings Feature Default Behavior Router Login User login URL www.routerlogin.com or /www.routerlogin.net User name (case-sensitive) admin Login password (case-sensitive) password Internet connection WAN MAC address WAN MTU size Use default address 1492 Port speed Autosensing Local network (LAN) LAN IP Subnet mask 192.168.0.1 255.255.255.0 RIP direction None RIP version Disabled RIP authentication None DHCP server Enabled Local network DHCP starting IP address (LAN) continued DHCP ending IP address 192.168.0.2 192.168.0.254 DMZ Enabled or disabled Time zone GMT for WW except NA and GR, GMT+1 for GR, GMT-8 for NA Time zone adjusted for daylight savings time Disabled SNMP Disabled Firewall Inbound (communications coming Disabled (except traffic on port 80, the HTTP port) in from the Internet) Outbound (communications going Enabled (all) out to the Internet) Source MAC filtering Disabled Supplemental Information 109