Netgear DGN2200v3 DGN2200v3 User Manual - Page 81

LAN Setup, LAN IP address, Subnet mask, To change the LAN settings, Advanced &gt, Apply

Get Netgear DGN2200v3 PDF manuals and user guides View all Netgear DGN2200v3 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 81 highlights

N300 Wireless ADSL2+ Modem Router DGN2200v3 LAN Setup The LAN Setup screen allows configuration of LAN IP services such as DHCP and Routing Information Protocol (RIP). The modem router is shipped preconfigured to use private IP addresses on the LAN side and to act as a DHCP server. The modem router's default LAN IP configuration is as follows: • LAN IP address. 192.168.0.1 • Subnet mask. 255.255.255.0 These addresses are part of the private address range designated by the Internet Engineering Task Force (IETF http://www.ietf.org/) for use in private networks, and should be suitable in most applications. If your network has a requirement to use a different IP addressing scheme, you can make those changes in the LAN Setup screen. Note: If you change the LAN IP address of the modem router while connected through the browser, you are disconnected. To reconnect, open a new connection to the new IP address and log in.  To change the LAN settings: 1. Select Advanced > LAN Setup. 2. Enter the LAN Setup configuration and click Apply to save your changes. Advanced Settings 81

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
Advanced Settings
81
N300 Wireless ADSL2+ Modem Router DGN2200v3
LAN Setup
The LAN Setup screen allows configuration of LAN IP services such as DHCP and Routing
Information Protocol (RIP). The modem router is shipped preconfigured to use private IP
addresses on the LAN side and to act as a DHCP server. The modem router’s default LAN IP
configuration is as follows:
•
LAN IP address
. 192.168.0.1
•
Subnet mask
. 255.255.255.0
These addresses are part of the private address range designated by the Internet
Engineering Task Force (IETF
) for use in private networks, and should be
suitable in most applications. If your network has a requirement to use a different IP
addressing scheme, you can make those changes in the LAN Setup screen.
Note:
If you change the LAN IP address of the modem router while
connected through the browser, you are disconnected. To
reconnect, open a new connection to the new IP address and log in.
To change the LAN settings:
1.
Select
Advanced >
LAN Setup
.
2.
Enter the LAN Setup configuration and click
Apply
to save your changes.