Netgear DGN2200v3 DGN2200v3 User Manual - Page 38
Allow guests to access My Local Network, Guest Wireless Network Name SSID
View all Netgear DGN2200v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
N300 Wireless ADSL2+ Modem Router DGN2200v3 Allow guests to access My Local Network. If you want guests to have access to your home network instead of just Internet access, then select this check box. Enable Wireless Isolation. If this check box is selected, then wireless clients (computers or wireless devices) that join the network can use the Internet, but cannot access each other or access Ethernet devices on the network. Guest Wireless Network Name (SSID). Change the network name to one that you will easily recognize. Security Options. NETGEAR strongly recommends that you set up wireless security for your guest network. For information about wireless security, see Security Basics on page 30 To set up a wireless guest network: 1. Select Setup > Guest Network. 2. Select the Enable Guest Network check box. 3. You can specify whether the SSID broadcast is enabled, and whether you want to allow the guest to access your local network. You can also change the SSID. • NETGEAR strongly recommends that you change the SSID to a different name. Note that the SSID is case-sensitive. For example, GuestNetwork is not the same as Guestnetwork. • For guest networks, wireless security is disabled by default. NETGEAR strongly recommends that you implement wireless security for the guest network. 4. Select a security option for the guest network and specify the password. 5. When you have finished making changes, click Apply. Wireless Settings 38