Netgear DGN2200v3 DGN2200v3 User Manual - Page 18
Modem Router Setup Preparation, Use Standard TCP/IP Properties for DHCP - change channel
View all Netgear DGN2200v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
N300 Wireless ADSL2+ Modem Router DGN2200v3 Modem Router Setup Preparation You can set up your modem router with the NETGEAR Genie as described in NETGEAR Genie Setup on page 19, with the Setup Wizard as described in Setup Wizard on page 22, or manually as described in Manual Setup (Basic Settings) on page 23. However, before you start the setup process, you need to have your ISP information and to make sure the laptops, PCs, and other devices in the network have the settings described here. Note: For a Macintosh or Linux system, you have to use manual setup. Use Standard TCP/IP Properties for DHCP If you set up your computer to use a static IP address, you have to change the settings back so that it uses Dynamic Host Configuration Protocol (DHCP). Replace an Existing Modem and Router To replace an existing modem and router, disconnect them and set them aside before starting the modem router setup. Gather ISP Information You need the following information to set up your modem router and to check that your Internet configuration is correct. Your Internet service provider (ISP) should have provided you with all the information needed to connect to the Internet. If you cannot locate this information, ask your ISP to provide it. When your modem router Internet connection is set up, you no longer need to launch the ISP's login program on your computer to access the Internet. When you start an Internet application, your modem router automatically logs you in. • Active Internet service provided by a DSL account • The ISP configuration information for your DSL account - ISP login name and password - ISP Domain Name Server (DNS) addresses - Fixed or static IP address - Host and domain names - Depending on how your ISP set up your Internet account, you could need to know one or more of these settings for a manual setup: - Virtual path identifier (VPI) and virtual channel identifier (VCI) parameters - Multiplexing method - Host and domain names Modem Router Setup 18