Panasonic AJ-HPM200 Operating Instructions - Page 114

Using This Unit With a Hard Disk Supported Hard Disks This unit supports the following hard disks types. • Panasonic portable hard disk unit P2 store (AJ-PCS060G) • A hard disk that supports the USB 2.0 interface • A hard disk that supports the eSATA interface ◆ NOTE: • It may not be possible to connect an eSATA hard disk that does not support the LINUX operating system. • Some eSATA hard disks may prolong the startup time of the unit. • The unit supports P2 store only in version Ver2.** or later version. P2 store hard disk in Ver1.** cannot be connected. Upgrade a hard disk in Ver1.** to the latest version before use. Hard disk types and available functions Available functions depend on the type of hard disk used. Hard disk type is displayed next to the "PARTITION:" on the left side of the hard disk explorer screen. ➝Refer to "Displaying Hard Disk Information (Explorer Screen)" (page 118). ◆ NOTE: • This unit supports USB bus power (5 V, 0.5 A) but some hard disks may not be able to start up using USB bus power. Should this happen, provide the hard disk with a separate power supply. • This unit does not support hard disks that are 2 TB (2048 GB) or larger. (Hard disk types and available functions) Hard disk type Features Available functions Thumbnail P2 card unit Clip unit Playback Use of Displaying display P2➝HDD HDD➝P2 P2➝HDD HDD➝P2 check*3 playlists*4 clips TYPE S A special disk format for high-speed M M M M*1 M M M M writing/loading data by P2 card unit. P2STORE The P2 Store (AJ-PCS060G) hard M × M × M M M M disk. Cannot be used for writing data. FAT A hard disk whose primary partition M × × M M M M M is formatted either using FAT16 or FAT32. The root partition or "CONTENTS"*2 directory under any directory is used. OTHER Hard disk other than those above × × × × × × × × * NTFS or other hard disk using a file system other than FAT16 or FAT32. Format M × M M *1: Adding clips to a partition will prevent writing back data by the card to that partition. *2: This enables up to 100 folders in up to three levels. Folders appear in order from the top level. Long file names and two-byte character file names are not supported. Example: /CONTENTS Can be displayed /SAMPLE/CONTENTS /SAMPLE/20090101/CONTENTS /SAMPLE/20090101/1200/CONTENTS Can be displayed Can be displayed Cannot be displayed ➝ This is the fourth level and will therefore not appear. 114 Connections: Using This Unit With a Hard Disk