Panasonic AJ-HPM200 Operating Instructions - Page 120

4 Press the ENTRY button to confirm the name. Importing Data from a Hard Disk to a P2 Card Importing data by partition (TYPE S hard disks and P2 Store disks only) Use the steps below to import data (load data from a hard disk to a P2 card) by partition (by P2 card) to a P2 card that has the same capacity as the source card. Deleting the last partition Use the steps below to delete the last partition. ◆ NOTE: • The last partition can only be deleted on a TYPE S hard disk. This function can delete only the last partition and not any intermediate partitions. • Make sure the partition to be deleted does not contain any data you need as it will not be possible to recover it after deletion. 1 Move the cursor to the last partition in the hard disk explorer screen and open the menu. 2 Choose [OPERATION] - [DELETE LAST PARTITION] and press the SET button. 1 Insert the P2 card that will store the imported partition. Be sure to insert a formatted P2 card. 2 Press the THUMBNAIL button to open the thumbnail display. 3 Connect the hard disk and wait until the hard disk indicator appears after disk recognition. 4 Press the MENU button. 5 Use the cursor buttons to select [HDD (USB or eSATA)] - [EXPLORE] and press the SET button. 6 Use the cursor buttons to select the partition from which data will be imported in the hard disk explorer screen. Or press the SET button repeatedly to open the thumbnail list screen. 7 Press the MENU button. 3 Select [YES] in the confirmation message that appears. 8 Use the cursor buttons to choose [OPERATION] - [IMPORT] and press the SET button. 4 When the partition has been deleted, "COMPLETE" appears and the last partition disappears from the list of partitions. 120 Connections: Using This Unit With a Hard Disk 9 Select the number of the P2 card slot that will store the imported data and press the SET button.