Panasonic AJ-HPM200 Operating Instructions - Page 125
Automatic Recording of Cards, Using the RS-422A interface
View all Panasonic AJ-HPM200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Connections Automatic Recording of Cards Using the RS-422A interface Using the IEEE1394 interface Registering IN and OUT points makes possible automatic recording (AUTO CAPTURE) between those two points. Audio and video played back from the current location can be recorded to a card. 1 Enter the mode that permits control of external devices. Press the PLAYER button when the unit is in the recording/ playback mode. 1 Enter the mode that permits control of external devices. Hold down the SHIFT button and press the PLAYER button when the unit is in the recording/playback mode. 2 Select an area for capture. • Use the following buttons to select an area for capture. IN+ENTRY Registers IN points IN+RESET Deletes IN points OUT+ENTRY Registers OUT points OUT+RESET Deletes OUT points IN+GOTO Sends a CUE-UP command to move to an IN point OUT+GOTO Sends a CUE-UP command to move to an OUT point IN Checks an IN point (counter indication) OUT Checks an OUT point (counter indication) IN+OUT Checks a DUR (counter indication) 3 Hold down the SHIFT button and press the REC button. • The specified area is automatically registered on the card. • The PLAYER button flashes during operation. • The current point is registered as an IN point if an IN point has not been registered. • Recording stops automatically when the OUT point is reached. If an OUT point has not been registered, recording continues until the STOP button is pressed. 2 Select the start of a section you want to capture. • Use the PLAY, STILL or other buttons to locate the start of the section you want to capture. 3 Hold down the SHIFT button and press the REC button. • Start playback on the external device to start recording. • To end recording, press the STOP button. ◆ NOTE: • The accuracy of recording start varies with the connected external device. Connections: External Remote Control 125