Panasonic AJ-HPM200 Operating Instructions - Page 159
Setup: Item Settings, HD SYS H ADV
View all Panasonic AJ-HPM200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Item FR SUPER No. DISP. 25 SYSTEM FREQ 26 HD SYS H ADV 30 MENU LOCK Setting FR SUPER No. DISP. For AJ-HPM200P 0000 59.94 0001 0002 0003 0004 0005 0006 0007 0008 50 23.98 24 29.97 59-23 60-24 25 60-25 For AJ-HPM200E 0000 0001 0002 0003 0004 0005 0006 0007 0008 59.94 50 23.98 24 29.97 59-23 60-24 25 60-25 0000 0H 0001 90H 0000 0001 OFF ON Settings and brief function description Sets system frequency. 0: 59.94 Hz 1: 50 Hz 2: 23.98 Hz 3: 24 Hz 4: 29.97 Hz 5: 59-23 Hz Receives 59.94 Hz input. Select this frequency to record 2:3 pull-down converted (24-frame signal) output from VariCam: AJ-HDC27 series camera, AJ-HPX2700 or other camera. 6: 60-24 Hz Receives 60Hz input. Select this frequency to record 2:3 pull-down converted (24-frame signal) output from VariCam: AJ-HDC27 series and AJ-HPX2700 series camera. 7: 25 Hz 8: 60-25 Hz Receives 60 Hz input. Select this frequency to record a variable frame rate set to 25p from VariCam: AJ-HDC27 series camera. 59.94Hz 29.97Hz only Specifies whether or not HD SDI output should advance 90H phase relative to SD REF input during SD REF input. 0: Outputs HD SDI at the same phase as SD REF. 1: HD SDI output is output at a phase that is 90H advanced relative to SD REF. NOTE: • The audio output and TC output are output in the same phase as HD SDI output. • At 720p, the phase difference is 120H. Sets/releases the system file lock mode. 0: Releases the lock (file data can be changed) 1: Lock is engaged (file data cannot be changed) Setup Setup: Item Settings 159