Panasonic AJ-HPM200 Operating Instructions - Page 211
Video Input, Video Adjustment Ranges, Digital Audio, Analog Output Ch1, Ch2, Ch3, Ch4
View all Panasonic AJ-HPM200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 211 highlights
Specifications Resolution: AVC-Intra 100: 1920 × 1080 (1080/59.94i, 1080/50i) 1280 × 720 (720/59.94p, 720/50p) AVC-Intra 50: 1440 × 1080 (1080/59.94i, 1080/50i) 960 × 720 (720/59.94p, 720/50p) VIDEO INPUT Analog composite input: BNC × 1 (VIDEO IN), 1.0 V[P-P] (75 Ω) Reference input: Automatic switching of black burst/HD 3 value SYNC, BNC × 1 (loop through × 1), automatic 75 Ω termination provided SDI input: BNC × 1, complies with SMPTE 292M/ 296M/299M during HD SDI input, complies with SMPTE 259M-C/272M-A, ITU-R BT.656- 4 during SD SDI input VIDEO OUTPUT SD analog composite output: BNC × 1 HD SDI/SD SDI output (switchable): BNC×1, complies with SMPTE 292M/296M/ 299M during HD serial digital output, complies with SMPTE 259M-C/272M-A, ITU-R BT.656-4 during SD serial digital output VIDEO ADJUSTMENT RANGES Video output gain: Can be set to -∞ to +3 dB or -∞ to +6 dB depending on menu Video output chroma gain: -∞ to +3 dB Video output HUE (chroma phase): ±30° Video output setup level: ±10 % Video output sync phase: ±15 µs Video output SC phase: ±180° AUDIO DIGITAL AUDIO Sampling frequencies: 48 kHz (synchronous with video) Quantizing: 16 bits Frequency response: 20 Hz to 20 kHz ±1.0 dB (at the reference level) Dynamic range: Better than 85 dB (1 kHz emphasis off, "A" weighted) Distortion: Less than 0.1 % (1 kHz, emphasis off, reference level) Crosstalk: Less than -80 dB (1 kHz, between 2 channels) Headroom: 12/18/20 dB selectable De-emphasis: T1 = 50 µs, T2 = 15 µs (auto on/off) AUDIO OUTPUT Analog output (CH1, CH2, CH3, CH4): XLR × 4, low impedance, +4/0/-3/-20 dBu selectable Digital output: BNC × 2 (CH1/2, CH3/4) AES/EBU format SMPTE276M SDI output: BNC × 1, complies with SMPTE 292M/296M/ 299M during HD SDI input, complies with SMPTE 259M-C/272M-A (480/59.94i), ITU-R BT.656-4 (576/50i) during SD SDI input Monitor output: Pin jacks × 2, -8 dBV, 600 Ω Headphones: Stereo mini jack (3.5 mm diameter), 8 Ω, variable level AUDIO INPUT Analog input (CH1, CH2, CH3, CH4): XLR × 4, 600 Ω/high impedance selectable (factory setting: high impedance) +4/0/-3/-20 dBu selectable Only CH2 input can be switched between LINE/MIC/MIC +48 V MIC: -60 dBu MIC+48V: Phantom +48V supported, -60 dBu Digital input: BNC × 2 (CH1/2, CH3/4) AES/EBU format SMPTE276M SDI input: BNC × 1, complies with SMPTE 292M/296M/ 299M during HD SDI input, complies with SMPTE 259M-C/272M-A (480/59.94i), ITU-R BT.656-4 (576/50i) during SD SDI input Specifications 211