Panasonic AJ-HPM200 Operating Instructions - Page 152

3 Set the time code. Use the TCG switch to set INT REGEN, INT PRESET or EXT. If EXT is set, recording of TC and UB values on AVCHD clips is permitted. 4 Set the audio level. Perform AVCHD playback if required and use the PB fader to set the audio level for AVCHD clip playback. ◆ NOTE: • The recording level control is disabled and recording is made using a UNITY level. ■ Recording operations 1 Display AVCHD thumbnails. ➝Refer to "Switching to AVCHD mode" (page 144). ◆ NOTE: • During dubbing, recording does not start from the beginning of an SD memory card. • If input reference signal is not stable during dubbing, dubbed video will be distorted. Input stable reference signal, or perform dubbing without inputting reference signal (internal reference). 2 Use the cursor buttons to select the clip you want to dub. To start dubbing midway in the clip, use the PLAY button or other button to locate the start position and press the STILL button to stop. When dubbing is started by a thumbnail, dubbing starts from the start of the selected clip. ◆ NOTE: • When resume play is activated, dubbing starts from the resume position. 3 Press the SHIFT + REC button. Recording on the P2 card starts simultaneous with AVCHD clip playback. If the P2 card is not ready for recording or if PB FORMAT and SYS FORMAT differ, pressing the SHIFT + REC buttons will not start operation. 4 Use the STOP button to stop dubbing. Stopping P2 card recording stops AVCHD clip playback and the AVCHD thumbnail screen reappears. 152 AVCHD Recording and Playback: Using an Optional AVCHD Board