Panasonic AJ-HPM200 Operating Instructions - Page 36
Using a USB Keyboard, Selecting keyboard layout
View all Panasonic AJ-HPM200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Using a USB Keyboard Connect a USB keyboard to the USB host terminal, select a full keyboard or ten keypad menu to enable input from a USB keyboard. Selecting keyboard layout 1 Open the thumbnail screen. 2 Press the MENU button. 3 Use the cursor buttons to choose [THUMBNAIL] - [SET UP] - [KEYBOARD]. 4 Press the SET button. This opens a menu for keyboard setup. 5 Move the cursor to the keyboard layout you want and press the SET button. ◆ NOTE: • Keyboard input is limited to alphanumeric characters. • Some keyboards may not operate normally. 36 Introduction: Using the On-screen Keyboard
36
Introduction: Using the On-screen Keyboard
Connect a USB keyboard to the USB host terminal, select a
full keyboard or ten keypad menu to enable input from a USB
keyboard.
1
Open the thumbnail screen.
2
Press the MENU button.
3
Use the cursor buttons to choose [THUMBNAIL] -
[SET UP] - [KEYBOARD].
4
Press the SET button.
This opens a menu for keyboard setup.
5
Move the cursor to the keyboard layout you want and
press the SET button.
◆
NOTE:
• Keyboard input is limited to alphanumeric characters.
• Some keyboards may not operate normally.
Using a USB Keyboard
Selecting keyboard layout