Panasonic AJ-HPM200 Operating Instructions - Page 136

3 "LAN" appears on the screen after switching modes. 4 To return to normal operating mode, press the MODE button again. "MAIN MODE" will appear to indicate that you have returned to the normal operating mode. ◆ NOTE: • To interrupt an import operation, press the SET button, select [YES] in the cancel confirmation dialog that appears and press the SET button again. Files that were not successfully imported to an SD card are deleted, but successfully imported files remain. • When importing starts, communications cut errors will no longer be detected. Use the above procedure to interrupt an import operation that has stalled. • The number of files in the selected folder and their size, network conditions may lengthen the time it takes to write them back. • Any files with the same path names on the SD memory card will be overwritten without any warning messages. However, if the path name is the same but the object differs (folder or file), an error is generated. • To prevent inadvertent overwriting, format the SD memory card before importing. • To use SSH, the FTP server must be SSH compliant. • Setting SSH to ENABLE will reduce transfer speed. When the import operation ends, "COPY COMPLETED!" appears. ◆ NOTE: • Operations including recording and playback are not available in server mode. • Although P2 cards can be inserted without problem in server mode, removing a P2 card will result in an E-30 error message. • SD memory cards cannot be accessed in server mode. FTP and Samba server services These services allow you to access P2 cards inserted in the unit or hard disks connected to it from a computer connected to the network. They enable reading and writing of hard disks in the FAT format and reading of hard disks in other formats and P2 cards. ■ FTP server service The FTP server service allows you use a computer on the network to transfer P2 card and hard disk clips to a computer using FTP software. ■ Samba server service With P2viewer you can check P2 card and hard disk content from a computer connected to the network and transfer clips to a computer. Using Server Functions Switching to FTP, Samba or HTTP server mode 1 Press the MODE button. 2 Use the cursor buttons to select [LAN] and press the SET button. In case of an FTP server and Samba server, P2 cards and hard disks are located in the following folders. P2 card: Hard disk (USB): Hard disk (eSATA): /p2/slot1 - slot6 /usb/hdd_usb_01 - hdd_usb_23 /sata/hdd_sata_01 - hdd_sata_23 ◆ NOTE: • A "Printer and FAX" icon that may appear on a computer connected via Samba cannot be set up. • Up to five clients can simultaneously connect to an FTP server. • It may take some time to access using group names or host names in Samba. • When the unit copies data to a hard disk, it saves the data to compatible partitions (01-23) on a TYPE S hard disk and to partition 01 on a FAT hard disk. It cannot see the 2nd or subsequent partitions on a FAT hard disk. 136 Connections: Connecting This Unit to a Network