Panasonic AJ-HPM200 Operating Instructions - Page 68
Using SD/SDHC Memory Cards, Displaying Miscellaneous SD Memory Card Information, Formatting SD
View all Panasonic AJ-HPM200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Using SD/SDHC Memory Cards This unit can use SD and SDHC memory to store setup menus, recorded metadata and AVCHD recordings*1. *1: Requires AVCHD codec board (optional accessory). ◆ NOTE: • Further information on the above functions is provided in the following sections in this manual. - Loading metadata ➝Refer to "Attaching Metadata to Clips" (page 64). - Storing and loading setup menus ➝Refer to "Setup" (page 155). - AVCHD recording and playback ➝Refer to "Using an Optional AVCHD Board" (page 140). • The SD memory card access lamp lights in orange during AVCHD recording and playback. It lights in green in the following cases. - While loading metadata - While storing and loading the setup menu - While formatting the card from the P2 card thumbnail screen or the setup menu - While reading the SD memory card property information on the P2 card thumbnail screen Displaying Miscellaneous SD Memory Card Information Use the following procedure to display SD memory card status on dialog for checking. 1 Open the thumbnail screen. 2 Press the MENU button. 3 Use the cursor buttons to choose [PROPERTY] - [DEVICE] - [SD CARD] and press the SET button. SD STANDARD: USED: BLANK: TOTAL: NUMBER OF CLIPS: PROTECT: Indicates that an SD memory card is formatted according to the SD/SDHC standard. SUPPORTED: Complies with SD/ SDHC NOT SUPPORTED: Does not comply with SD/SDHC Used capacity (bytes) Free space (bytes) Total capacity (bytes) The number of clips on an SD memory card when clips have been copied to an SD memory card using a proxy or a P2 camera recorder. Write protected • This unit cannot record proxies. 4 Press the SET button and the MENU button to end processing. Formatting SD Memory Cards Use the following procedure to format an SD memory card inserted in an SD memory card slot. 1 Open the thumbnail screen. 2 Press the MENU button. The following information may also appear depending on card status. 3 Use the cursor buttons to select [OPERATION] - [FORMAT] - [SD CARD]. 68 Clip Management: Using SD/SDHC Memory Cards