Panasonic AJ-HPM200 Operating Instructions - Page 52

SORT: PROPERTY DISP.: STOP MODE: THUMBNAIL INIT: Specify the order thumbnails appear. OFF In recorded order ON Slot order (clips in the same slot appear according to date and time of recording). Specifies the items that will appear in a simplified property display on the left side of the thumbnail. ➝Refer to "Selecting items to be displayed as properties" (this page). Specifies whether or not to return to the thumbnail screen after stopping playback started from the thumbnail screen. STAY Stays in playback mode RETURN Return to thumbnail mode ➝Refer to "Playing Back Clips" (page 55). Return above settings to their factory defaults (initial values). 4 Press the SET button. 3 Use the cursor buttons to choose [THUMBNAIL] - [SET UP] - [PROPERTY DISP.]. 4 Press the SET button to open the setup menu. All selected items are indicated by check marks. 5 Press the SET button and add check marks for items to be displayed. Pressing the SET button causes unchecked items to be checked and checked items to be unchecked. ◆ NOTE: • Up to six items can appear simultaneously. • When the sixth item has been selected, no other unchecked item can be selected. Removing the check mark for a checked item makes it possible to select other items. ◆ NOTE: • Selecting [THUMBNAIL INIT] opens a confirmation dialog. Select [YES]. 5 Press the MENU button to end processing. Selecting items to be displayed as properties Select items that will appear in a simplified property display on the left side of the thumbnail. 1 Open the thumbnail screen. 2 Press the MENU button. 52 Clip Management: Thumbnail and Clip Management