Panasonic AJ-HPM200 Operating Instructions - Page 163

Setup Item Setting FR SUPER No. DISP. FR SUPER No. DISP. Settings and brief function description When set to 59.94 Hz 59.94Hz 50Hz only 0000 SYSFMT Specifies the format used by the playlist. 0001 30PN 0002 24PN 0: Format set in setup menu No. 020 (SYS FORMAT) and No. 025 REC FMT (HD). When set to 50 Hz 1: 720/30PN (when set to 59.94 Hz)/720/25PN (when set to 50 Hz) 0000 0001 SYSFMT 2: 720/24PN 25PN 0: Format set in setup menu No. 020 (SYS FORMAT) and No. 025 (REC FMT (HD)). 1: 1080/30PN (when set to 59.94 Hz)/1080/25PN (when set to 50 Hz) or 720/30PN (when 026 PLY LST FMT set to 59.94 Hz)/720/25PN (when set to 50 Hz) 2: 1080/24PN or 720/24PN NOTE: • When 480i or 576i is selected in setup menu No. 020 (SYS FORMAT), a 30PN and 24PN selection is handled as a SYSFMT setting. • The number of lines in the AVC-Intra format depends on the setting in the setup menu No. 020 (SYSFORMAT). • When a selection other than 59.94 or 50 is made in setup menu No. 25 (SYSTEM FREQ), the format selected in menu No. 020 (SYS FORMAT) and No. 025 (REC FMT (HD)) is used. 028 AVCHD FMT 0000 0001 0002 0003 PH 59.94Hz 50Hz only HA Specifies AVCHD recording rate. HG 0: PH mode (approx. 21 Mbps) HE 1: HA mode (approx. 17 Mbps) 2: HG mode (approx. 13 Mbps) 3: HE mode (approx. 6 Mbps) NOTE: • Displayed only when an AJ-YCX250G AVCHD codec board (optional) is installed. • In 720P mode, recording is always made in PH mode. 031 OUT REF 0000 0001 0002 AUTO REF INPUT 59.94Hz 50Hz 29.97Hz 25Hz only Select reference for video output. 0: Uses the reference signal input to the REF connector as reference. When there is not input to the REF connector, the selected video input signal is used as reference. When there is no reference and video input signal, the internal clock is used. 1: The reference input signal is used as reference. If there is no such signal, the internal clock is used. 2: The video input signal is used as reference. If there is no such signal, the internal clock is used. 032 REC REF 0000 0001 NORMAL 59.94Hz only SLTC Specifies the reference to synchronize the frames for recording. 0: The input video signal is automatically identified and serves as reference. 1: The time code which is input to the SD I IN connector is identified and serves as reference. NOTE: When the SLTC is selected, the following settings are necessary to validate the settings for this item: • Setup menu No. 25 (SYSTEM FREQ): 59.94 • Setup menu No. 020 (SYS FORMAT): 720p • INPUT SELECT VIDEO button on the unit: HDSDI 040 VFR REC 0000 0001 OFF ON 29.97Hz 59-23Hz 60-24Hz 60-25Hz only Specifies whether or not to make a VFR recording when the recording format is 720p. 0: Does not make VFR recording 1: Makes VFR recording ➝ Refer to "Variable Frame Rate-Recording" (page 43). Setup: Item Settings 163