Panasonic AJ-HPM200 Operating Instructions - Page 65

Clip Management Counter value The counter value is indicated as a four-digit number. When recording method "TYPE 2" is selected for the USER CLIP NAME in the clip metadata that is loaded, the counter value is incremented by 1 for each new recording and a new clip is generated. ■ To reset the counter value Use the following procedure to reset the counter value. 1. Open the thumbnail screen. 2. Press the MENU button. 3. Use the cursor buttons to choose [META DATA] - [PROPERTY] - [USER CLIP NAME] and press the SET button. ■ Incrementing the counter value of the USER CLIP NAME for clips exceeding 4 GB In the following case, one shot is recorded as multiple clips and the counter value is automatically incremented and recorded for each shot. • When an 8 GB or larger P2 card is used in this unit and each continuous recording exceeds a preset time. ➝For details, refer to "Dividing clips over 4 GB in length" (page 38) • When one recording spans multiple cards. Example of a recording on one P2 card (DVCPRO HD): REC start (start of recording) Stop (recording stop) Recording duration = 6 minutes Clip 1 Clip 2 Counter value = A Counter value = A + 1 Approx. 5 min. Approx. 1 min. Example of recording a clip on two P2 cards: REC start (start of recording) Stop (recording stop) Clip 1 Clip 2 Counter value = A Counter value = A + 1 4. Use the cursor buttons to select [COUNT RESET] and press the SET button. 1st card 2nd card A P2 device will indicate the thumbnail and the counter value of clip 1 when thumbnails and property of the clip are displayed. Loading Set Metadata Values The counter value is reset to 1. 5. Press the EXIT button to end processing. Use the following procedure to load metadata from an SD memory card. 1 Insert the SD memory card storing the metadata upload file. 2 Open the thumbnail screen. 3 Press the MENU button. 65 Clip Management: Attaching Metadata to Clips