Panasonic AJ-HPM200 Operating Instructions - Page 151
Playing Back AVCHD Clips, Recording AVCHD Material on P2 Cards, Setting up skip mode SKIP MODE
View all Panasonic AJ-HPM200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
AVCHD Recording and Playback To turn off resume playback, set to [OFF] in step 4. ◆ NOTE: • A change in setting will not change the resume playback setting of a P2 card. Setting up skip mode (SKIP MODE) Select skip operation (cue up) to be performed during various playback operations and pause. 1 Press the MENU button. 2 Select [PLAY SETUP] and press the SET button. 3 Select [SKIP MODE] and press the SET button. 4 Select skip operation and press the SET button. CLIP: Press NEXT (SHIFT + FF), PREV (SHIFT + REW) buttons during a pause to move to the beginning of the next or previous clip. CLIP & INDEX: Press NEXT (SHIFT + FF), PREV (SHIFT + REW) buttons during a pause to move to the beginning of the next or previous clip or the location of the next or previous index location. 5 Press the MENU button to return to the thumbnail screen. ◆ NOTE: • An index is attached to a certain video point of a clip being recorded or played back. You can then select only clips with indexes for display/playback. Note, however, that an index cannot be attached nor removed by this unit. Playing Back AVCHD Clips Playback Use the steps below to play back clips, which are available only from thumbnails. 1 Use the cursor buttons to move the cursor to the clip you want to play. 2 Press the PLAY button. The clip at the cursor location will now be played. Press the STOP button to stop playback and return to thumbnails. Slow/fast forward/rewind Use the search dial during playback or pause to select playback speed. Press the PLAY button to return to normal playback. ◆ NOTE: • The audio is played back only at 1x speed. • During reverse playback, video is played back with gaps every 0.5 sec interval. • In JOG mode, not like during P2 card playback, a smooth playback is not possible. • In SHTL mode, 16x playback speed is available (maximum). Clip forward/rewind 1 Play back or enter pause mode. 2 Press the PREV (SHIFT + FF)/NEXT (SHIFT + REW) button. The unit will now perform set skip operation. Recording AVCHD Material on P2 Cards Use the steps below to record AVCHD video to a P2 card in the DVCPRO HD or AVC-Intra format. ■ Preparing for recording 1 Set recording and playback format. Set the recording format (1080i/720P) to the same format as the PB format from setup menu No. 020 (SYS FORMAT) and set the recording format (DVCPRO HD/AVC-I 100/ AVC-I 50) using setup menu No. 025 (REC FORMAT (HD)). Then set the playback format for AVCHD mode. ➝Refer to "Setting playback format (PB FORMAT)" (page 150). ◆ NOTE: • Dubbing is not available when setting of the setup menu No.020 (SYS FORMAT) differs from PB FORMAT. 2 Insert a P2 card that can be recorded. Insert a card for dubbing or select a slot to enable recording. ◆ NOTE: • Dubbing is not available when loop recording is activated. 151 AVCHD Recording and Playback: Using an Optional AVCHD Board