Panasonic AJ-HPM200 Operating Instructions - Page 40
Preventing Accidental Deletion, For the latest information on P2 cards and, SD memory cards
View all Panasonic AJ-HPM200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
3 Press the EJECT button to eject the P2 card. COARFDF ON LOCK ᶄ ᶃ Preventing Accidental Deletion Set the write-protection switch to [PROTECT] to prevent accidental deletion of data recorded on a P2 card. ◆ NOTE: • Removing a P2 card in the thumbnail screen automatically closes the thumbnail screen. • Do not remove P2 cards during access or during recognition directly after insertion (when the P2 card access LED flashes orange); otherwise the P2 cards may be damaged. If a P2 card by any chance is removed during access, [E-30] appears on the LCD monitor and the LCD panel displays the [AUTO OFF] warning. All P2 card access LEDs will flash rapidly in orange. Turn off the power, and then turn it back on. • The clips on a P2 card that was removed during access may no longer be in the right order. Check the clips and perform the necessary repair operation. ➝ For details, refer to "Repairing Bad Clips" (page 60). • Removing a P2 card during formatting will in most cases destroy the formatting. Reformat the card after restarting the PC. • In LAN mode, P2 cards must be available at all times and can therefore not be removed. To remove a P2 card, return to the main mode. PROTECT Write-protection switch ◆ NOTE: • Switching the write-protection switch during recording, playback or other access operation will not take effect until after these access operations (playback, recording, etc.) complete. For the latest information on P2 cards and SD memory cards For the latest information not available in the Operating Instructions of P2 cards and SD memory cards, visit the P2 support desk at the following Web sites. For English: https://eww.pavc.panasonic.co.jp/pro-av/ 40 Introduction: Recording, Playback and P2 Card Handling