Panasonic AJ-HPM200 Operating Instructions - Page 129

Connections User settings for server service Select [USER LOGIN SETTING] and open any of the following screens to make the required settings. ■ Changing password and deleting user 1 Move the cursor to the user whose password is to be changed or deleted. ■ New user registration 1 Press the MENU button to open the menu. 2 Select [DELETE USER] or [CHANGE PASSWORD] from the menu. 2 Select [NEW USER] and press the SET button. Enter user name and password in the screen for registering users. After entering the user name, press the LAST X button to move the cursor to the "PASSWORD" field, then input a password. Press the LAST X button again to move the cursor to the "RETRY PASSWORD" field, and input the same password you entered immediately before. ◆ NOTE: • If you click [OK] without entering a password, "CANNOT ADD! NO INPUT!" appears. 3 To change password, change it on the screen for changing passwords. ◆ NOTE: • A password should be between 6 to 15 characters long. • Use the LAST X button to go between items in the screens for registering users and changing passwords. Saving and loading settings Use the steps below to save settings to SD memory cards or load settings from SD memory cards. ■ Loading settings from an SD memory card 1 Open the network screen. 2 Press the MENU button. 3 Use the cursor buttons to choose [LOAD FROM SD CARD] and press the SET button. 4 Select the file you want to load from the list of setup files that appears and press the SET button. Connections: Connecting This Unit to a Network 129