Panasonic AJ-HPM200 Operating Instructions - Page 178
CH1&2, Refer to the Audio V Fade Function
View all Panasonic AJ-HPM200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Item FR SUPER No. DISP. 727 REC CH3 728 REC CH4 731 PB FADE 732 EMBEDDED AUD 772 MON FILTER 774 AVCHD A CH 775 25M REC CH Setting FR SUPER No. DISP. Settings and brief function description 0000 0001 0002 0003 0004 0005 CH1 CH2 CH3 CH4 CH1+2 CH3+4 Specifies the input signal to be recorded on the audio CH3. 0: Audio input CH1 signal 1: Audio input CH2 signal 2: Audio input CH3 signal 3: Audio input CH4 signal 4: Mixed audio input CH1 and CH2 signal 5: Mixed audio input CH3 and CH4 signal 0000 0001 0002 0003 0004 0005 CH1 CH2 CH3 CH4 CH1+2 CH3+4 Specifies the input signal to be recorded on the audio CH4. 0: Audio input CH1 signal 1: Audio input CH2 signal 2: Audio input CH3 signal 3: Audio input CH4 signal 4: Mixed audio input CH1 and CH2 signal 5: Mixed audio input CH3 and CH4 signal 0000 0001 AUTO CUT Specifies audio processing to be performed between clips and edit points created using playlist or Edit Copy. 0: Depends on recording status. (Refer to the section "Audio V Fade Function" (page 192).) 1: Forcible cut. NOTE: AVCHD playback (option) is disabled. 0000 0001 OFF Specifies whether or not audio data will be superimposed on HD SDI output and SD SDI ON output. 0: Audio data is not superimposed. 1: Audio data is superimposed. 0000 0001 OFF Selects whether signals output to the monitor, headphones and speaker will be filtered. LOWCUT 0: No filtering 1: Low-cut filtering 0000 0001 0002 0003 CH1&2 CH3&4 CH5&6 CH7&8 59.94Hz 50Hz only Specifies audio channels for AVCHD recording. 0: Audio selected as REC CH1 and REC CH2 will be recorded as CH1 and 2. CH1 and CH2 audio are recorded as CH1 and CH2 during dubbing from P2 cards to AVCHD. 1: Audio selected as REC CH3 and REC CH4 will be recorded as CH1 and 2. CH3 and CH4 audio are recorded as CH1 and CH2 during dubbing from P2 cards to AVCHD. 2: Audio CH5 and 6 will be recorded a CH1 and 2. 3: Audio CH7 and 8 will be recorded a CH1 and 2. NOTE: Displayed only when an AJ-YCX250G AVCHD codec board (optional) is installed. 0000 0001 2CH 4CH 59.94Hz 50Hz only Specifies the number of audio channels that will be used for DVCPRO (25 Mbps) or DV (25 Mbps) recording. 0: Records on two channels. 1: Records on four channels. NOTE: DVCPROHD, AVC-Intra50 and AVC-Intra100 always record on 8 channels, and DVCPRO50 always records on 4 channels. 178 Setup: Item Settings