Panasonic AJ-HPM200 Operating Instructions - Page 78

DUR: Indicates the duration between the set IN and the OUT points on the player when the IN and OUT buttons are simultaneously pressed. P2 : Ext : HDD : ◆ NOTE: • When either one of the IN and OUT points has not been set, this function indicates the duration between the set IN or OUT point and the current location. When the player is a P2 card, this appears before the left end of the player time code display. When the player is an external device, this appears before the left end of the player time code display. When the player is a hard disk, this appears before the left end of the player time code display. 2. Player thumbnail status indication Indicates the following player thumbnail status: [ALL], [SAME FORMAT], [SELECTED], [MARKER], [TEXTMEMO] and [SLOTn]. 3. Player thumbnail display Displays player thumbnails. Displayed clip number, indicators and other information are the same as those displayed on the thumbnail display . ➝Refer to "Thumbnail Screen Names and Functions" (page 47). Green Indicates the rough location of the IN triangle (a): point when a player IN point is set. ◆ NOTE: • When the player is an external device, the green triangle appears at 1/3 of the time bar regardless of IN point location. • When player thumbnail status is set to SELECTED CLIPS or other status and the clip with the set IN point does not belong to these clips, a green bar ( | ) appears to the left of the time bar. Red triangle Indicates the rough location of the OUT (b): point when a player OUT point is set. ◆ NOTE: • When the player is an external device, the red triangle appears at a location 2/3 of the time bar regardless of OUT point location. • When player thumbnail status is set to SELECTED CLIPS or other status and the clip with the set OUT point does not belong to these clips, a red bar ( | ) appears to the right of the time bar. 5. Player playback screen display Displays video of player playback. Recorder screen The recorder screen shows video of events registered in the playlist. 1 4. Player time bar indication The total width of the time bar indicates the total length of the player (total duration). The background color of the time bar is light gray when the player is operating and dark gray when the recorder is operating. Yellow bar Indicates the rough location of current ( | ): playback. ◆ NOTE: • When the player is an external device, the yellow bar ( | ) indicating playback location does not appear. 2 3 1. Recorder time code indication Indicates the time code of the recorder playback location. • Displayed information TCR: UBR: CTL: IN: Indicates recorder time code. Indicates recorder user bits. Indicates the position relative to recorder start position. Indicates the time code of the IN point set on the recorder when the IN button is pressed. 78 Editing: Playlist Function