Panasonic AJ-HPM200 Operating Instructions - Page 130
Tools for checking operation, status, indication and initialization, that appears.
View all Panasonic AJ-HPM200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
5 Use the cursor buttons to select [YES] when the message [SURE?] appears and press the SET button. ■ Saving settings to an SD memory card 1 Open the network screen. 2 Press the MENU button. 3 Use the cursor buttons to choose [SAVE TO SD CARD] and press the SET button. 4 Enter a file name in the screen for entering file names that appears. Numeric characters indicating the date and time are automatically entered for the name of the new file. Use the full keyboard to change it as required. ➝Refer to "Using the Full Keyboard" (page 35). 5 Select [OK] and press the SET button or ENTRY button. ◆ NOTE: • File names must not be longer than 8 characters. • LAN, client and server settings can be saved and loaded at a time (regardless of whatever screen is open). • User settings in the server setup screen and FTP USER PASSWORD in the client setup screen cannot be saved or loaded. Tools for checking operation, status indication and initialization Use the steps below to check FTP client network connection. ■ Checking connection (PING) 1 Open the thumbnail screen. 2 Press the MENU button to open the menu. 3 Use the cursor buttons to choose [NETWORK] - [TOOLS] - [PING] and press the SET button. 4 Check the status of set address connection. When connection is confirmed, "PING SUCCESSFUL!" appears. "PING FAILED!" appears if a connection cannot be established within 30 seconds. Use the log described in the next section to determine the cause of a failure. ■ Opening the connection log (LOG) 1 Open the thumbnail screen. 2 Press the MENU button to open the menu. 3 Use the cursor buttons to choose [NETWORK] - [TOOLS] - [LOG] and press the SET button. Check the content of the log. 4 To return to the menu after checking, press the EXIT button. ◆ NOTE: • The content of the log is cleared every time a connection (except PING) is made to an FTP server. • Some operations may not generate any data in the log. • The password is indicated as "*" in the log. ■ Status display 1 Open the thumbnail screen. 2 Press the MENU button to open the menu. 3 Use the cursor buttons to choose [NETWORK] - [STATUS] and press the SET button. Connection status is displayed. 4 To return to the menu after checking, press the EXIT button. ◆ NOTE: • Status data is not updated in real-time. To view the most recent data, perform the steps above again. • When the DHCP setting is set to ENABLE, displayed value may differ from the LAN setup. • In DHCP setup, status information is not correctly displayed when address information is being obtained. • The default gateway is not displayed as status information if not correctly set up. • A LAN setup that contains a secondary (substitute) DNS but no primary (priority) DNS is indicated as DNS1. ■ Initializing network settings (INITIALIZE) 1 Open the thumbnail screen. 2 Press the MENU button to open the menu. 3 Use the cursor buttons to choose [NETWORK] - [INITIALIZE] and press the SET button. When initialization completes the menu reappears. 130 Connections: Connecting This Unit to a Network