Ricoh SP4100N Software User Guide - Page 205

Remote Maintenance by telnet diprint The direct printing port enables direct printing from a network-connected computer. Use the "diprint" command to change direct printing port settings. View settings The following command displays the current direct printing port settings: msh> diprint Example output: port 9100 timeout=300(sec) bidirect on con multi apl async • The "port" specifies the port number of the direct printing port. • The "bidirect" setting indicates whether the direct printing port is bidirectional or not. 6 Setting timeout msh> diprint timeout {30 - 65535} • You can specify the timeout interval to use when the printer is expecting data from the network. • The default is 300 seconds. Specifying the number of concurrent connections msh> diprint conn {multi | single} • The above command specifies the number of concurrent diprint connections. Specify "multi" for multiple connections or "single" for a single connection. • The default is "multi". dns Use the "dns" command to configure or display DNS (Domain Name System) settings. View settings The following command displays current DNS settings: msh> dns IPv4 DNS server configuration The following command enables or disables the IPv4 DNS server address: msh> dns "number" server "server address" 203