Ricoh SP4100N Software User Guide - Page 228

6. Monitoring and Configuring the Printer Parameter encval {1|2|3|4} wepauth {open|shared} 6 rate {auto|11m|5.5m|2m|1m} security {none|wep|wpa} wpaenc {tkip|ccmp} wpaauth {wpapsk | wpa} 226 Value configured To use this function, set the same key number and WEP key for all ports that transmit data to each other. You can omit the numbers with "val". The key number is set to 1 when making these omissions. You can specify which of the four WEP keys is used for packet encoding. "1" is set if a number is not specified. You can set an authorization mode when using WEP. The specified value and authorized mode are as follows: open: open system authorized (default) shared: shared key authorized rate You can set the IEEE 802.11b transmitting speed. The speed you specify here is the speed at which data is sent. You can receive data at any speed. auto: automatically set (default) 11m: 11 Mbps fixed 5.5m: 5.5 Mbps fixed 2m:2 Mbps fixed 1m: 1 Mbps fixed You can specify the security mode. none: No encryption(default)S wep: WEP encryption wpa: WPA encryption You can specify WPA encryption key when using WPA encryption. tkip: TKIP (default) ccmp: CCMP (AES) You can specify the WPA authentication mode when using WPA encryption. wpapsk: WPA-PSK authentication(default)