Ricoh SP4100N Software User Guide - Page 218

6. Monitoring and Configuring the Printer show Use the "show" command to display network interface board configuration settings. View settings msh> show • If "-p" is added, you can view settings one by one. • p.237 "Understanding the Displayed Information" slp Use "slp" command to view and configure SLP settings. msh> slp ttl "ttl_val" • You can search the NetWare server using SLP in the PureIP environment of NetWare 5/5.1 and 6 Netware 6/6.5. Using the "slp" command, you can configure the value of TTL which can be used by SLP multicast packet. • The default value of TTL is 1. A search is executed only within a local segment. If the router does not support multicast, the settings are not available even if the TTL value is increased. • The acceptable TTL value is between 1 and 255. smb Use the "smb" command to configure or delete the computer or workgroup name for SMB. Computer Name settings msh> smb comp "computer name" • Set computer name using up to 15 characters. Names beginning with "RNP" or "rnp" cannot be entered. Working Group Name settings msh> smb group "work group name" • Set workgroup name using up to 15 characters Comment settings msh> smb comment "comment" • Set comment using up to 31 characters Notify print job completion msh> smb notif {on | off} 216