Ricoh SP4100N Software User Guide - Page 213

Remote Maintenance by telnet passwd Use the "passwd" command to change the remote maintenance password. Changing the Password msh> passwd • Enter the current password. • Enter the new password. • Renter the new password to confirm it. Changing the Password of the administrators using the Supervisor msh> passwd {Administrator ID} • You can delete the administrator password or set up a new one. • Enter the new password. • Renter the new password to confirm it. • Be sure not to forget or lose the password. 6 • The password can be entered using up to 32 alphanumeric characters. Passwords are case-sensitive. For example, "R" is not the same as "r". pathmtu Use the "pathmtu" command to display and configure the PathMTU Discovery service function. View Setting msh> pathmtu Enabling / disabling the PathMTU Discovery service msh> pathmtu {on | off} • The default is "on". • If the MTU size of the sent data is larger than the router's MTU, the router will declare it impassable, and communication fails. If this happens, selecting the "pathmtu" to "off" optimizes the MTU size and prevents data output failure. • Depending on the environment, information might not be obtained from the router, and communication will fail. If this happens, select the "pathmtu" to "off". prnlog Use the "prnlog" command to obtain printer log information. 211