Ricoh SP4100N Software User Guide - Page 215
set, Adding a specified IPv6 destination to Routing Table
UPC - 026649027994
View all Ricoh SP4100N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 215 highlights
Remote Maintenance by telnet Adding a specified IPv6 destination to Routing Table msh> route add6 "destination" "prefixlen" "gateway" • Specify the IPv6 address to destination and gateway. Deleting a specified IPv6 destination from Routing Table msh> route delete6 "destination" "prefixlen" • Specify the IPv6 address to destination and gateway. Display information about a specified IPv6 route information msh> route get6 "destination" • Specify the IPv6 address to destination and gateway. Enabling/disabling a specified IPv6 destination msh> route active6 "destination" "prefixlen" {on | off} Route initialization msh> route flush • The maximum number of IPv4 routing tables is 16. 6 • The maximum number of IPv6 routing tables is 2. • Set a gateway address when communicating with devices on an external network. • The same gateway address is shared by all interfaces. • "Prefixlen" is a number between 1 and 128. set Use the "set" command to set the protocol information display "active" or "inactive". View settings The following command displays protocol information (active/inactive). msh> set ipv4 msh> set ipv6 msh> set appletalk msh> set netware msh> set smb msh> set protocol • When protocol is specified, information about TCP/IP, AppleTalk, Netware, SCSI print, and SMB appears. msh> set parallel 213