Ricoh SP4100N Software User Guide - Page 273

Printing Files Directly from Windows 2. Add an IPv4 address and host name to the hosts file using the following format: 192.168.15.16 host # NP "192.168.15.16" is the IPv4 address, "host" is the printer's host name, and "#NP" is replaced by comments. Insert a space or tab between "192.168.15.16" and "host", between "host" and "#NP" respectively, using one line for this format. 3. Save the file. • When using a host name under Windows Server 2003/2003 R2 with IPv6 protocol, perform host name resolution using an external DNS server. The host file cannot be used. Printing Commands The following explains printing operations using the "lpr", "rcp" and "ftp" commands. Enter commands using the command prompt window. The location of the command prompts varies depending on operating systems: • Windows 95/98 [Start] - [Programs] - [MS-DOS Prompt] • Windows Me [Start] - [Programs] - [Accessories] - [MS-DOS Prompt] • Windows 2000 8 [Start] - [Programs] - [Accessories] - [Command Prompt] • Windows XP, Windows Server 2003/2003 R2 [Start] - [All Programs] - [Accessories] - [Command Prompt] • Windows NT 4.0 [Start] - [Programs] - [Command Prompt] • Match the data format of the file to be printed with the emulation mode of the printer. • If the message "print requests full" appears, no print jobs can be accepted. Try again when sessions end. For each command, the amount of possible sessions is indicated as follows: • lpr: 10 • rcp, rsh: 5 • ftp: 3 • Enter the file name in a format including the path from the directory executing commands. 271