Ricoh SP4100N Software User Guide - Page 211
ipv6, lpr, netware, View Setting, IPv6 stateless address, Checking host name when deleting the job
UPC - 026649027994
View all Ricoh SP4100N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 211 highlights
Remote Maintenance by telnet After configuring the settings, the following message appears: User configuration changed. ipv6 Use the "ipv6" command to display and configure IPv6 settings. View Setting msh> ipv6 IPv6 stateless address msh> ipv6 stateless {on|off} • If "on" is selected, IPv6 requests information required for maintaining stateful connection to the router for as long as the printer power is turned on. This setting allows information from the router to be obtained constantly, and periodically refreshes the effective period of the stateless address. lpr 6 Use the "lpr" command to view and configure LPR settings. View Setting msh> lpr Checking host name when deleting the job msh> lpr chkhost {on|off} • If "on" is selected, you can delete print jobs only from the IP address of the host that sent the print job. If LPR is disabled, you can also delete print jobs sent from the IP addresses other than that of the host. netware Use the "netware" command to configure the NetWare settings such as the print server name or file server name. Netware Printer Server Names msh> netware pname "character string" • Enter the NetWare print server name using up to 47 characters. Netware File Server Names msh> netware fname • Enter the NetWare file server name using up to 47 characters. 209