Ricoh SP4100N Software User Guide - Page 230
wins, Be sure to specify the interface.
UPC - 026649027994
View all Ricoh SP4100N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 230 highlights
6. Monitoring and Configuring the Printer Parameter srvcert {on | off} imca {on | off} srvid "character string" Value configured Usable characters: ASCII 0x20-0x7e(128 bytes). The default is blank. You can set the server certificate. The default is "off". You can enable or disable the certificate when the intermediate certificate authority is present. The default is "off". You can set the server ID and subdomain of the certificate server. • You can use this command only when the IEEE 802.11b interface unit is installed. 6 wins Use the "wins" command to configure WINS server settings. Viewing settings msh> wins • If the IPv4 address obtained from DHCP differs from the WINS IPv4 address, the DHCP address is the valid address. Configuration msh> wins "interface_name" {on | off} • {on} means "active" and {off} means "inactive". • Be sure to specify the interface. • wlan can be specified only when the IEEE 802.11b interface unit is installed. Interface name Interface configured ether Ethernet interface wlan IEEE 802.11b interface Address configuration Use the following command to configure a WINS server IP address: msh> wins "interface_name" {primary|secondary} "IP address" • Use the "primary" command to configure a primary WINS server IPv4 address. 228