Samsung SGH-A827 User Manual - Page 9
Installing the microSD™ Card, Remove the adapter from the phone by gently pulling - charger
View all Samsung SGH-A827 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Caution!: For connection to an electrical supply not located in the U.S., you must use an adaptor of the proper configuration for the power outlet. Use of the wrong adaptor could damage your phone and void your warranty. 1. Plug the connector of the travel adaptor into the jack on the side of the phone. Correct + Incorrect Caution!: The previous illustration shows both the correct and incorrect method for connecting the charger. If the incorrect method is attempted, damage to the accessory port will occur therefore voiding the phone's warranty. 2. Plug the adaptor into a standard AC wall outlet. Important!: The battery charging function may stop if you are on a call or viewing a streaming-video while charging your battery. 3. When the phone is completely charged (the battery icon is not animated), unplug the adapter from the power outlet. 4. Remove the adapter from the phone by gently pulling the connector out. Important!: You must unplug the adaptor before removing the battery from the phone during charging to avoid damage. Installing the microSD™ Card To add additional memory to your phone, you can insert a microSD™ card into the side of the phone. Use the following instructions and illustrations for proper insertion and removal. 1. Open the side slot to insert the card. Place the microSD™ card into the slot. 2. Push the microSD™ card into the slot until it clicks into place. Note: Please note that the side with the gold contact pins should be facing down when inserting the card. Getting Started 6