Western Digital WDBVHT0080JCH User Manual - Page 139
top. The RAID rebuild may take up to 15 hours depending on drive capacity and, activity
View all Western Digital WDBVHT0080JCH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
MY BOOK LIVE DUO USER MANUAL 7. Gently slide the replacement drive assembly into the drive slot until is fully inserted. 8. Replace the cover plate and secure it with the thumbscrew. Note: Do not over-tighten the thumbscrew. 9. Close the door and firmly push in until it locks into place. 10. The drive starts the rebuild process automatically and the LEDs cycle from bottom to top. The RAID rebuild may take up to 15 hours depending on drive capacity and activity, but typically will complete in 7 to 12 hours. Allow the RAID rebuild to complete. Important: Do not attempt to use the device during the rebuild process. REPLACING A DRIVE - 131
MY BOOK LIVE DUO
USER MANUAL
REPLACING A DRIVE – 131
7.
Gently slide the replacement drive assembly into the drive slot until is fully inserted.
8.
Replace the cover plate and secure it with the thumbscrew.
Note: Do not over-tighten the thumbscrew.
9.
Close the door and firmly push in until it locks into place.
10.
The drive starts the rebuild process automatically and the LEDs cycle from bottom to
top. The RAID rebuild may take up to 15 hours depending on drive capacity and
activity, but typically will complete in 7 to 12 hours. Allow the RAID rebuild to complete.
Important:
Do not attempt to use the device during the rebuild process.