Xerox M118i User Guide - Page 106

7 CentreWare Internet Services Feature name Internet Services Settings Port Status Setting items Auto Refresh Interval Use to enter a time interval when the contents of the browser display will be refreshed automatically. Display Language - Allows you to select the language to be displayed. Administrator Mode Allows you to specify whether to appoint the Key Operator for CentreWare Internet Services settings. Administrator Name Enter the Key Operator name. Administrator Password Enter the Key Operator password. Re-enter Password Allows you to verify the Key Operator password by reentering the same password. This page displays the port settings and allows you to select whether to enable or disable different ports used in the printer. For more information about these ports, refer to the System Administration Guide. Parallel Select the check box to enable. USB Select the check box to enable. EtherTalk Select the check box to enable. SMB Select the check box to enable. You can also configure the Transport Protocol to be used. To enable the Transport Protocol, select the check box of TCP/IP and/or NetBEUI. NetWare Select the check box to enable. You can also configure the Transport Protocol to be used. To enable the Transport Protocol, select the check box of IPX/SPX and/or TCP/IP. LPD Select the check box to enable. SNMP Select the check box to enable. You can also configure the Transport Protocol to be used. To enable the Transport Protocol, select the check box of UDP and/or IPX. IPP Select the check box to enable. Port9100 Select the check box to enable. UPnP Select the check box to enable. Send E-mail Select the check box to enable. Mail Notice Services Select the check box to enable. Internet Services Select the check box to enable. 106 Xerox CopyCentre/WorkCentre 118 User Guide