Xerox M118i User Guide - Page 139
TCP/IP], [IPX/SPX], or both., PostScript data is processed.
UPC - 095205219265
View all Xerox M118i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Print Settings • Port Status - Specify whether to [Enable] or [Disable] the port status of NetWare. • Transport Protocol - Specify the transport protocol to be used for NetWare. Select [TCP/IP], [IPX/SPX], or both. • Print Mode - Specify the method used to process print data (applied print language). When [Auto] is selected, the machine automatically detects the print language of the data received, then interprets and prints the data correctly. When [PCL] or [PS] is selected, the data received from the PC is processed as each of these respective data types. • PJL - PJL commands are required when printing using the print driver. Specify whether to [Enable] or [Disable] PJL commands that are sent from the PC. • No. of searches - Specify how many times the file server is searched. Specify a value between 1 and 100 in increments of 1, or set it to [No Limit]. To specify a value, select [Number of times], and then enter the value. • TBCP Filter - Specify whether to [Enable] or [Disable] the TBCP filter when the PostScript data is processed. SMB Use to set up SMB. • Port Status - Specify whether to [Enable] or [Disable] the port status of SMB. • Transport Protocol - Specify the transport protocol to be used for SMB. Select [TCP/ IP], [NetBEUI], or both. • Print Mode - Specify the method used to process print data (applied print language). When [Auto] is selected, the machine automatically detects the print language of the data received, then interprets and prints the data correctly. When [PCL] or [PS] is selected, the data received from the PC is processed as each of these respective data types. • PJL - PJL commands are required when printing using the print driver. Specify whether to [Enable] or [Disable] PJL commands that are sent from the PC. • TBCP Filter - Specify whether to [Enable] or [Disable] the TBCP filter when the PostScript data is processed. IPP Use to set up IPP. • Port Status - Specify whether to [Enable] or [Disable] the port status of IPP. • Print Mode - Specify the method used to process print data (applied print language). When [Auto] is selected, the machine automatically detects the print language of the data received, then interprets and prints the data correctly. When [PCL] or [PS] is selected, the data received from the PC is processed as each of these respective data types. • PJL - PJL commands are required when printing using the print driver. Specify whether to [Enable] or [Disable] PJL commands that are sent from the PC. Xerox CopyCentre/WorkCentre 118 User Guide 139