Xerox M118i User Guide - Page 37
Changing the Default Time Settings, Sleep Mode
UPC - 095205219265
View all Xerox M118i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Changing the Default Time Settings Sleep Mode The machine automatically switches to the Sleep Mode after the Low Power Mode continues for a specified period of time. The Sleep Mode has a reduced power consumption compared to the Low Power Mode. In this mode, the screen is turned off, and the Power Saver light is on. The Sleep Mode is cancelled when the button is pressed, or a fax or print job is received by the machine. The factory default setting of 1 minute is customer changeable within the range of 1 to 239 minutes. For more information, refer to Power Saver in the Setups chapter on page 128. Changing the Default Time Settings This section describes how to change the default time settings such as Auto Clear, Power Saver, and Scanning Timer. For more information, refer to Timer Settings in the Setups chapter on page 127. 1. Press the button on the control panel. 2. Select [System Settings] using the button. button 3. Enter the Key Operator password using the numeric keypad on the control panel. NOTE: The default Key Operator password is "11111". 4. Select [Confirm] using the button, or press the button. 5. Select [Common Settings] on the [System Settings] screen using the button. 6. Press the button. 7. Select [Timer Settings] on the [Common Settings] screen using the button. 8. Press the button. Xerox CopyCentre/WorkCentre 118 User Guide 37