Xerox M118i User Guide - Page 47

Auditron Access Screen • HexDump - Specify whether to print the data sent from a PC in the ASCII code corresponding to the hexadecimal notation format so the data contents can be checked. • Draft Mode - Specify whether or not to print in draft mode. • Line Termination - Select the line termination: [Off], [Add-LF] (appends a line feed to carriage return), [Add-CR] (appends a carriage return to line feed and form feed), or [CR-XX] (appends a carriage return to line feed and form feed, and a line feed to a carriage return). Auditron Access Screen This feature electronically records the number of copies or prints made for each user account, and controls access and use of the machine. To enable this feature, you need to log in as the Key Operator and change the default setting of [Auditron Mode] from [Off] to [On]. The Key Operator can change the password or account limits for copy/ print jobs. For more information, refer to Auditron Administration in the Setups chapter on page 131. 1. Press the button on the control panel. 2. Select [System Settings] using the button. 3. Enter the Key Operator password using numeric keypad. NOTE: The default Key Operator password is "11111". button 4. Select [Confirm] using the button, or press the button. 5. Select [Auditron Admin.] on the [System Settings] screen using the button. 6. Press the button. 7. Select the required option. 8. Press the button. 9. Change the settings as required. 10. Press the button. If the Auditron feature is enabled, enter a registered password for each account before using the machine. Xerox CopyCentre/WorkCentre 118 User Guide 47