Xerox M118i User Guide - Page 146
Initialize/Delete Data, Software Option, Fax Settings
UPC - 095205219265
View all Xerox M118i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
9 Setups Memory - Select this to perform spool processing. This uses the memory as the receive buffer for spool processing. If you select this option, specify the receive buffer memory capacity for spool processing within 0.5 to 32 MB in 0.25 MB increments. Initialize/Delete Data Use this feature to initialize the default values or print meter recorded in the NVM memory, or delete the data such as the form registered in the machine. 1. Select the required option by selecting [T] or [S] using the button. 2. Press the button. 3. Perform the necessary operations. 4. Press the button. The selected option is indicated by an asterisk (*). NVM Initialize the NVM memory. The NVM memory is a non-volatile memory that allows the settings of the machine to be retained even when power is off. When initializing the NVM memory, the specified value for each item resets to the factory default values, clearing all user settings. Press the button to initialize. Print Meter Initialize the data for the print meter reports. When initializing the data of the print meter, the value of the meter resets to 0. Press the button to initialize. Software Option Use this feature to activate the optional Scan to E-mail software feature. Enter the password for the Scan to E-mail feature. The password is on the inside cover of the Scan to E-mail Instructions. For more information on activating this feature, refer to the Scan to E-mail Quick Setup Guide. Fax Settings This screen allows you to configure and change the default settings for using the fax features. For more information, refer to the following. Date/Time - page 147 Daylight Savings - page 147 Fax Send Settings - page 148 Receive Settings - page 149 146 Xerox CopyCentre/WorkCentre 118 User Guide