Xerox M118i User Guide - Page 142
System Settings, WINS Server, Ethernet Settings, IPX/SPX Frame Type, Filter, Offline Auto Clear
UPC - 095205219265
View all Xerox M118i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
9 Setups WINS Server • Get DHCP Address - Specify whether to automatically acquire or manually specify the IP address required for using WINS from a DHCP server. • Primary IP, Secondary IP - These items are used to confirm the automatically acquired address or manually set address. Enter addresses in the format xxx.xxx.xxx.xxx. Each group of 3 numbers (xxx) must be within the range of 0 to 255. When the primary IP address is invalid, the secondary IP address is also invalid. Ethernet Settings Sets the communication speed/connector type of the Ethernet interface. When [Auto] is selected, 100BASE-TX or 10BASE-T is automatically selected. Select [100BASETX] when fixing Ethernet to 100BASE-TX for use. Select [10BASE-T] when fixing Ethernet to 10BASE-T for use. IPX/SPX Frame Type Specify the following types for IPX/SPX frame type: [Ethernet II], [Ethernet 802.3], [Ethernet 802.2], or [Ethernet SNAP]. When [Auto] is selected, the frame type is automatically specified. Filter • IP Filter - Specify whether or not to restrict acceptance of printing by the IP address. When [On] is selected, only printing from a registered address is accepted. • IP Address - When restricting acceptance of printing by the IP address, register the IP address for acceptance of printing. Up to ten IP addresses can be registered. The registered IP address is needed to set with the IP address mask. Enter IP address or IP mask in the format: xxx.xxx.xxx.xxx.xxx. *1 When entering text, use the following items. [Enter Number]: Select to enter numbers. [Enter Alphabet]: Select to enter alphabetic characters. [Text Input]: Select to confirm the entered text. System Settings Use this feature to specify the default settings for various printing reports or to set the machine clock. 1. Select the required option by selecting [T] or [S] using the button. 2. Press the button. 3. Perform the necessary operations. 4. Press the button. The selected option is indicated by an asterisk (*). Offline Auto Clear 142 Xerox CopyCentre/WorkCentre 118 User Guide