Xerox M118i User Guide - Page 140
Adobe Protocol - Specify the PostScript communications protocol. Select [Normal], EtherTalk, Port9100
UPC - 095205219265
View all Xerox M118i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
9 Setups • Access Control - Specify whether to enable or disable the access control when stopping or deleting the print job. • DNS - Specify whether or not to use the name registered in DNS when recognizing the machine. • Add Port No. - Specify the port number 0, 80, or within the range of 8000 to 9999. • Connection Time-Out - Specify the period of time the machine fails to receive or send data before connection time-out is activated. Connection time-out can be set within the range of 2 to 3600 seconds in 1 second increments. • TBCP Filter - Specify whether to [Enable] or [Disable] the TBCP filter when the PostScript data is processed. EtherTalk Use to set up EtherTalk. • Port Status - Specify whether to [Enable] or [Disable] the port status of EtherTalk. • PJL - PJL commands are required when printing using the print driver. Specify whether to [Enable] or [Disable] PJL commands that are sent from the PC. USB Use to set up USB. • Port Status - Specify whether to [Enable] or [Disable] the port status of USB. • Print Mode - Specify the method used to process print data (applied print language). When [Auto] is selected, the machine automatically detects the print language of the data received, then interprets and prints the data correctly. When [PCL] or [PS] is selected, the data received from the PC is processed as each of these respective data types. • PJL - PJL commands are required when printing using the print driver. Specify whether to [Enable] or [Disable] PJL commands that are sent from the PC. • Auto Eject Time - Specify the time to wait until automatically ejecting the remaining data in the memory of the machine when data is not being received. Any time can be specified within the range 5 to 1275 seconds in 5 second increments. • Adobe Protocol - Specify the PostScript communications protocol. Select [Normal] when the communication protocol is ASCII format. Select [Binary] when the communication protocol is binary format. With some data, the data is processed for printing faster than [Normal]. Select [TBCP] when the communication protocol is a mixture of ASCII format and binary format, and these formats are switched by specific control codes. Port9100 Use to set up Port9100. • Port Status - Specify whether to [Enable] or [Disable] the port status of Port9100. • Print Mode - Specify the method used to process print data (applied print language). When [Auto] is selected, the machine automatically detects the print language of the 140 Xerox CopyCentre/WorkCentre 118 User Guide