Brother International Innov-is XJ1 Operation Manual - Page 135

■ Aligning the Embroidering Position a Calibrate the (page 132) position of the background image. b Press . CONFIRMING THE PATTERN POSITION e Press . Memo • The orientation of the pattern will change depending on the orientation of the embroidery positioning sticker. c When the following message appears, press .  When the following message appears, press . 4 Basic Embroidery f Remove the embroidery start embroidering. positioning sticker, and then * To remove the embroidery positioning sticker more easily, press so that the embroidery frame moves slightly forward and away from under the needle. After the embroidery positioning sticker is removed, press . d Select the position to be set as the reference point. Checking the Pattern Position The carriage moves and shows the pattern position. Watch the embroidery frame closely to make sure the pattern will be embroidered in the right place. a Press . 133