Brother International Innov-is XJ1 Operation Manual - Page 149

MAKING EMBROIDERY ADJUSTMENTS For example: Press to select 25 mm (1 inch) and the machine will not trim a jump stitch of 25 mm or less before moving to the next stitching. Changing the Thread Color Display You can display the name of the thread colors or embroidery thread number. Memo • Colors on the screen may vary slightly from actual spool colors. • [Original], imported data remains the brand thread created with the software, is set as a default. Note • If design has many trims it is recommended to select a higher jump stitch trim setting in order to reduce the amount of excess tails on backside of fabric. • The higher number of the jump stitch length selected, the fewer number of times the machine will trim. In this case, more jump stitches remain on the surface of the fabric. a Press .  The settings screen appears. b Press .  The embroidery settings screen appears. c Display screen. [Thread Color] in the embroidery settings d Use or the to display the name of embroidery thread number. the thread colors Adjusting the Embroidery Speed 5 Advanced Embroidery a Press .  The settings screen appears. b Press .  The embroidery settings screen appears. c Display [Max Embroidery Speed] in the embroidery settings screen. d Use speed. to change the maximum embroidery e Use to select a thread brand. Aligning the Pattern and the Needle Example: Aligning the lower left side of a pattern and the needle Memo • SPM is the number of stitches embroidered in one minute. • Decrease the embroidery speed when embroidering on thin, thick, or heavy fabrics and when using a speciality thread like a metallic thread. • The setting specified before the main power is set to OFF remains selected the next time that the machine is turned ON. 147