Brother International Innov-is XJ1 Operation Manual - Page 154
Embroidering Split Embroidery Patterns
View all Brother International Innov-is XJ1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
EMBROIDERY APPLICATIONS c Remove the embroidery unit, and cut around the frame from the embroidery outside of the stitches of the fabric for the appliqué piece. And then, reattach the embroidery frame to the embroidery unit. a Insert the USB media containing the created embroidery pattern, and then select the split split embroidery pattern to be embroidered. (page 150) Note • Do not remove the fabric from the embroidery frame to cut it. Also, do not pull or push on the fabric. Otherwise, the fabric may loosen in the frame. d Select as the the satin appliqué stitch frame pattern of the same shape and embroider the satin stitch pattern to create an appliqué. b Select section to be embroidered. c Press . Embroidering Split Embroidery Patterns Split embroidery patterns created with PE-DESIGN Ver. 7 or later, or PE-DESIGN NEXT can be embroidered. With split embroidery patterns, embroidery patterns larger than the embroidery frame are divided into multiple sections, which combine to create a single pattern after each section is embroidered. For details on creating split embroidery patterns and for more detailed embroidery instructions, refer to the Instruction manual included with PE-DESIGN Ver. 7 or later, or PE-DESIGN NEXT. 152